A hunt 2 remember Posted April 6, 2020 Member ID: 274 Content Count: 639 Reputation: 112 Joined: 11/22/2019 Status: Offline Last Seen: January 12 Share Posted April 6, 2020 1 minute ago, A hunt 2 remember said: Ordered my 32's today. Warrior AT's. Plus forward high clearance A arms with super duty ball joints and since I was feelin' ambitious, i bought the deluxe plug n play turn signal/horn kit.... Hoping this is as painless as they make it sound. Because I will be doing this swap in the woods. Luckily I have a 20lb Co2 bottle to set the beads... But I always carry a full lineup of tools when in the RV. So thinking I got this! Here's Bear as a before picture here in camp. Link to comment Share on other sites More sharing options...
Rudy Posted April 6, 2020 Member ID: 64 Content Count: 88 Reputation: 35 Joined: 02/17/2019 Status: Offline Last Seen: December 21, 2021 Share Posted April 6, 2020 1 hour ago, A hunt 2 remember said: Ordered my 32's today. Warrior AT's. Plus forward high clearance A arms with super duty ball joints and since I was feelin' ambitious, i bought the deluxe plug n play turn signal/horn kit.... Let us know how you like the kit. I was looking at this same Super Atv kit a couple of days ago. Installation looks pretty simple. Good luck! It’s definitely going to make a difference on the stock defender! Can wait to see the after pictures! Link to comment Share on other sites More sharing options...
A hunt 2 remember Posted April 6, 2020 Member ID: 274 Content Count: 639 Reputation: 112 Joined: 11/22/2019 Status: Offline Last Seen: January 12 Share Posted April 6, 2020 7 minutes ago, Rudy said: Let us know how you like the kit. I was looking at this same Super Atv kit a couple of days ago. Installation looks pretty simple. Good luck! It’s definitely going to make a difference on the stock defender! Can wait to see the after pictures! The light kit is backordered and will be more like may. But the ground clearance is really what I'm looking for. But considering it's still not legal to drive on the roads. It's for when I'm out of this BLUE STATE and in the RED!! Really though, it doesn't stop me where I'm doing my onroad traveling, it will just be there in case I get a REALISTIC COP... But YES!!! I will keep you all posted. I'll most likely start a thread 'turn signal kits' the good, the bad, and the UGLY!! Link to comment Share on other sites More sharing options...
A hunt 2 remember Posted April 11, 2020 Member ID: 274 Content Count: 639 Reputation: 112 Joined: 11/22/2019 Status: Offline Last Seen: January 12 Share Posted April 11, 2020 (edited) Well, tires and wheels delivered to the local RV and motel here in NOWHERE.... Mounted/aired up/ mounted....(in the woods) Now for the forward A arms.... but I'm gonna run them like this unil monday.... STOKED!!! I LOVE THEM!!! AND THE GC??? BOOYAH!! Edited April 11, 2020 by A hunt 2 remember 2 Link to comment Share on other sites More sharing options...
Rocky1 Posted April 14, 2020 Member ID: 380 Content Count: 5 Reputation: 1 Joined: 03/30/2020 Status: Offline Last Seen: November 18, 2020 Share Posted April 14, 2020 Love the look but I was wondering if you had to use any wheel spacers on the rear. Link to comment Share on other sites More sharing options...
A hunt 2 remember Posted April 18, 2020 Member ID: 274 Content Count: 639 Reputation: 112 Joined: 11/22/2019 Status: Offline Last Seen: January 12 Share Posted April 18, 2020 Nothing on the rear. With OEM A arms I had to tweak out the bottom of the flare with a wedge of wood and on the downward roll hard on the suspension, it will rub. But I've got the 2" forward arms, just haven't put them on yet. I'm in the woods hunting. Although I did mount the tires and wheels here. Let it be known I have added a Battle Armor 2" lift. (which I happen to have another... long story) but NO SPACERS Link to comment Share on other sites More sharing options...
A hunt 2 remember Posted May 10, 2020 Member ID: 274 Content Count: 639 Reputation: 112 Joined: 11/22/2019 Status: Offline Last Seen: January 12 Share Posted May 10, 2020 On 4/18/2020 at 1:03 PM, A hunt 2 remember said: Nothing on the rear. With OEM A arms I had to tweak out the bottom of the flare with a wedge of wood and on the downward roll hard on the suspension, it will rub. But I've got the 2" forward arms, just haven't put them on yet. I'm in the woods hunting. Although I did mount the tires and wheels here. Let it be known I have added a Battle Armor 2" lift. (which I happen to have another... long story) but NO SPACERS Well, had some extra time and bought yet another grease gun. (Mini sized) and installed the A arms. LOVE THEM!! #superatv Rides smoother on the gravel roads. Seems to handle the corners a bit better without wanting to swap ends.. and the wooden wedgy is gone with PLENTY of clearance. Could have gone 34's if not for the rancher bumper. Oh, and it looks BAD @$$!!! Link to comment Share on other sites More sharing options...
Rudy Posted May 10, 2020 Member ID: 64 Content Count: 88 Reputation: 35 Joined: 02/17/2019 Status: Offline Last Seen: December 21, 2021 Share Posted May 10, 2020 1 hour ago, A hunt 2 remember said: Well, had some extra time and bought yet another grease gun. (Mini sized) and installed the A arms. LOVE THEM!! #superatv Rides smoother on the gravel roads. Seems to handle the corners a bit better without wanting to swap ends.. and the wooden wedgy is gone with PLENTY of clearance. Could have gone 34's if not for the rancher bumper. Oh, and it looks BAD @$$!!! I just installed 32’s on my maverick sport but tried them on my defender first and they barely cleared while turning. Does the super atv a-arms give extra clearance on the front. I love the look of the 32’s on the defender. Link to comment Share on other sites More sharing options...
A hunt 2 remember Posted May 11, 2020 Member ID: 274 Content Count: 639 Reputation: 112 Joined: 11/22/2019 Status: Offline Last Seen: January 12 Share Posted May 11, 2020 17 hours ago, Rudy said: I just installed 32’s on my maverick sport but tried them on my defender first and they barely cleared while turning. Does the super atv a-arms give extra clearance on the front. I love the look of the 32’s on the defender. Pretty sure!! They move the wheel forward 2". I'd call them and check. But I'm pretty sure they are what you're looking for. Oh, and they are twice as BEEFY as the OEM arms Link to comment Share on other sites More sharing options...
Rudy Posted May 11, 2020 Member ID: 64 Content Count: 88 Reputation: 35 Joined: 02/17/2019 Status: Offline Last Seen: December 21, 2021 Share Posted May 11, 2020 34 minutes ago, A hunt 2 remember said: Pretty sure!! They move the wheel forward 2". I'd call them and check. But I'm pretty sure they are what you're looking for. Oh, and they are twice as BEEFY as the OEM arms Yes I noticed how much stronger these a arms are. We just installed a set on my buddy’s Mule pro fxt. Good looking a arms. I will definitely give them a call. Link to comment Share on other sites More sharing options...
A hunt 2 remember Posted May 11, 2020 Member ID: 274 Content Count: 639 Reputation: 112 Joined: 11/22/2019 Status: Offline Last Seen: January 12 Share Posted May 11, 2020 1 minute ago, Rudy said: Yes I noticed how much stronger these a arms are. We just installed a set on my buddy’s Mule pro fxt. Good looking a arms. I will definitely give them a call. I didn't go with the rears. Didn't want to lose GC over humpty bumps. Although i may see if they have a set of stock positioned rear arms. As it is now, or how it was before I spread the WB 2". I would case the tops of them, and the BRP rock sliders? WORTHLESS!! They look cool. BUT THATS IT!! The bottom of my ride is WASTED!!! Going to UPGRADE them!! Widening them in the front to match up with the flares and lowering them below the rig. But most importantly building them out of material that will STAND UP TO THE ABUSE!!! Rather than just look cool.... SHAME ON BRP!!! Link to comment Share on other sites More sharing options...
7Summit Posted December 4, 2020 Member ID: 785 Content Count: 1 Reputation: 0 Joined: 12/04/2020 Status: Offline Last Seen: December 7, 2020 Share Posted December 4, 2020 I just picked up a 2021 defender limited max. Looking into new wheels and tires. Everything is find suggests the 2” forward a arms need to be installed. However, yours looks like it works out perfect. Dealer cannot confirm the limited has offset arms. Any issues now that you been running for a while? Did you reclutch and belt problems? Thanks Link to comment Share on other sites More sharing options...
Scott Shackelford Posted December 6, 2020 Member ID: 789 Content Count: 1 Reputation: 0 Joined: 12/06/2020 Status: Offline Last Seen: January 12, 2021 Share Posted December 6, 2020 Any issue with gearing and clutches slipping? Link to comment Share on other sites More sharing options...
Toolboy Posted December 7, 2020 Member ID: 323 Content Count: 50 Reputation: 11 Joined: 01/15/2020 Status: Offline Last Seen: December 31, 2020 Author Share Posted December 7, 2020 No problems with clutch or power. None of these non turbo units sets the world on fire with power. Mine still pulls 66 mph gps with the 32's. I am sure it accelerates a little slower, but these are the size tires my machine needs. The clutch doesn't slip either. Link to comment Share on other sites More sharing options...
Toolboy Posted December 7, 2020 Member ID: 323 Content Count: 50 Reputation: 11 Joined: 01/15/2020 Status: Offline Last Seen: December 31, 2020 Author Share Posted December 7, 2020 2000 miles without any clutch or belt problems. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now