Garret Posted January 11, 2020 Member ID: 315 Content Count: 7 Reputation: 2 Joined: 01/11/2020 Status: Offline Last Seen: May 21, 2020 Share Posted January 11, 2020 New 2020 xmr max performs great but I'm just wondering why my exhaust header pipes glow bright red when I haven't even rode it hard. Is this normal? Link to comment Share on other sites More sharing options...
pmbaseball24 Posted January 13, 2020 Member ID: 298 Content Count: 107 Reputation: 40 Joined: 12/14/2019 Status: Offline Last Seen: May 31, 2021 Share Posted January 13, 2020 Noticed the same on mine. Shot it with an IR gun and it was at 470 degrees after a short, easy ride with the engine idling. Link to comment Share on other sites More sharing options...
Garret Posted January 14, 2020 Member ID: 315 Content Count: 7 Reputation: 2 Joined: 01/11/2020 Status: Offline Last Seen: May 21, 2020 Author Share Posted January 14, 2020 My dealer said it was normal. Just doesn't seem right for that much heat. Maybe for emission purposes.... Link to comment Share on other sites More sharing options...
Kuz Posted March 25, 2020 Member ID: 374 Content Count: 2 Reputation: 0 Joined: 03/25/2020 Status: Offline Last Seen: March 25, 2020 Share Posted March 25, 2020 same here on 2020 limited...scary to see especially when you see pictures/posts of other defenders catching on fire/burning up from that area. Link to comment Share on other sites More sharing options...
Andystoy19 Posted March 25, 2020 Member ID: 133 Content Count: 697 Reputation: 154 Joined: 04/24/2019 Status: Offline Last Seen: 14 hours ago Share Posted March 25, 2020 Combustion temperatures on 2 stroke and 4 stroke gas engines and diesel engines in the combustion chamber are well above 1200'F depending on load conditions. It is not uncommon to see the exhaust next to the head glow various shades of red especially at night or low light conditions. I looked up a color chart for different types of iron and this glow will start to happen at about 1000'F and keep getting lighter and brighter as the temperature goes up. The Defender does not appear to have an EGT sensor so the engine temperature will be controlled by the ECM, the injectors, engine knock sesor, air temperature and cooling system. The ECM is programmed on the rich side to help keep exhaust temperatures in check especially at WOT. The two stroke engines have always had a temperature concern they always ran the best just before they seized. During the carb days some of us ran Exhaust probes especially if we were running an aftermarket pipe. The Skidoo engines would not tolerate temperatures above 1200 F for more than a second or two before you burned a hole in the piston. If you are concerned about the exhaust temperature near the engine starting a fire you shouldn't be as manufacturers typically install an aluminum heat shied to protect anything that could be flammable. On the other hand if you are driving around in deep grass, hay, or other flammable things that might accumulate on top of the engine it would be a good idea to blow that area clean after a ride with an air hose. You can get stick on foil backed insulation to put on the underside of the cab near the hot spot of concern or you can get header wrap insulation that you can wrap the pipe next to head to keep the temperature inside the exhaust system. I have not used either.🤔 Link to comment Share on other sites More sharing options...
Scott Lee Posted February 15, 2021 Member ID: 887 Content Count: 1 Reputation: 0 Joined: 02/15/2021 Status: Offline Last Seen: February 16, 2021 Share Posted February 15, 2021 My daughter and I were just driving around the neighborhood and low speeds looking at all the snow. We live in East Texas so this is something exciting for her. After about 15 - 20 minutes of riding I smelled something burning. When I stopped and lifted the back tilt bed on our 2019 HD5 it burst into flames. Fire appears to have started behind the drivers seat on or near the top of the engine the spreading to the read cab wall and eventually the driver seat before I could get it extinguished. Is this an issue Can Am / BRP is having? Low hours not even a year old. Link to comment Share on other sites More sharing options...
Bad Daddy Posted February 16, 2021 Member ID: 759 Content Count: 107 Reputation: 17 Joined: 11/16/2020 Status: Offline Last Seen: November 20, 2023 Share Posted February 16, 2021 Wow! We have tracks on our machine and at 3500 ft, we run at 5500 rpm for hours... high range, across the frozen lakes. I will have to watch out for this! Link to comment Share on other sites More sharing options...
Andystoy19 Posted February 17, 2021 Member ID: 133 Content Count: 697 Reputation: 154 Joined: 04/24/2019 Status: Offline Last Seen: 14 hours ago Share Posted February 17, 2021 Catching fire is unusual, have you been able to find the source? If the machine is stored out in the open it may have been a rodent storing food or building a nest? 🤔 If you are able to find the source give us an update. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now