Rgreenop22 Posted April 16, 2022 Member ID: 1,552 Content Count: 3 Reputation: 0 Joined: 04/16/2022 Status: Offline Last Seen: April 25, 2022 Share Posted April 16, 2022 Hey there, I am going to be purchasing the s3 springs, and I was going to get the 2” bracket lift to add with the springs. In theory I should gain around 4 inches. I wanted to go up to 30 or 32” tires…. If I added the 2” rough country spring spacers on top of the other 2, would that completely pitch the tires inward and loose my width? Or would the 3 even go together? Or should I just purchase a full 6” lift package Link to comment Share on other sites More sharing options...
RossO Posted April 16, 2022 Member ID: 330 Content Count: 123 Reputation: 30 Joined: 01/28/2020 Status: Offline Last Seen: 12 hours ago Share Posted April 16, 2022 My honest opinion would be to get the 6” lift if you’re looking for a lot of lift because your axles are probably going to either be too short once you go that high or the angles of your cv joints are going to be too much, but if you’re just trying to fit 30-32” tires you won’t need much lift if any. All I did was the spring spacer and I clear 31” tires with more than enough space. Link to comment Share on other sites More sharing options...
Rgreenop22 Posted April 16, 2022 Member ID: 1,552 Content Count: 3 Reputation: 0 Joined: 04/16/2022 Status: Offline Last Seen: April 25, 2022 Author Share Posted April 16, 2022 Oh thanks, I thought I was reading people were struggling with 30” tires with stock suspension. Maybe I’ll get the s3s and the rough country spacers and see where I land. Link to comment Share on other sites More sharing options...
RossO Posted April 16, 2022 Member ID: 330 Content Count: 123 Reputation: 30 Joined: 01/28/2020 Status: Offline Last Seen: 12 hours ago Share Posted April 16, 2022 30’s will definitely clear with just one of those lift options. I’m pretty sure people on this forum have ran 30’s with stock suspension Link to comment Share on other sites More sharing options...
DJLA Posted April 16, 2022 Member ID: 1,543 Content Count: 17 Reputation: 4 Joined: 04/13/2022 Status: Offline Last Seen: December 20, 2022 Share Posted April 16, 2022 I have 30's on mine with stock suspension (picture), they do not rub at all. We had 32's on our shop limited pro and they would rub when turning. We have put on a set of SuperATV forward offset A arms on a defender, they allow up to 34" tires without a lift. https://www.superatv.com/can-am-defender-hd-10-high-clearance-2-inch-forward-offset-a-arms Link to comment Share on other sites More sharing options...
Andystoy19 Posted April 16, 2022 Member ID: 133 Content Count: 697 Reputation: 154 Joined: 04/24/2019 Status: Offline Last Seen: 13 hours ago Share Posted April 16, 2022 Check out the builds section, you may find some more useful information. As stated above too much lift will cause the front axles to bind when the machine is going through some rough side to side stuff.🙂 , Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now